|
|
Joined: Jan 2009
Posts: 37
Member
|
OP
Member
Joined: Jan 2009
Posts: 37 |
Hello, I've just installed an 8SLI card into slot 3 of an OS7200 expansion cabinet. I get dial tone from all 8 ports, but it is extremely loud and distorted, and doesn't pass DTMF tones. Can anyone think of a setting in programming that can be changed? Or anything else that I can try?
Thank you.
|
|
|
|
|
Joined: Sep 2001
Posts: 2,290 Likes: 4
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,290 Likes: 4 |
Did you do an 806 when you installed the card?
What s/w level are you running?
|
|
|
|
|
Joined: Jan 2009
Posts: 37
Member
|
|
OP
Member
Joined: Jan 2009
Posts: 37 |
I didn't pre-install the card, just installed it and the system detected it and gave it a numbering plan. I'm running MCP VER 4.22 and LCP VER 4.12
|
|
|
|
|
Joined: Sep 2001
Posts: 2,290 Likes: 4
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,290 Likes: 4 |
I believe you need 4.60 and above to run that card
|
|
|
|
|
Joined: Jun 2006
Posts: 2,965 Likes: 3
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 2,965 Likes: 3 |
Of your card is an 8SLI3 then what pvj says is correct. As you have a mcp card you can't run 4.60b, so you'll have to replace the mcp with a mp20
|
|
|
|
Forums84
Topics93,820
Posts636,739
Members49,643
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
151
guests, and
21
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
