|
|
|
|
Joined: Apr 2007
Posts: 48
Member
|
|
Member
Joined: Apr 2007
Posts: 48 |
Hi All
I have a 7400 on 4.60b with the following cards
5 dig DLI2
1 SLI3
1 x OAS V2.03
1 x SVMI 20i V6.03
1 x Tepri Vi.07
The system crashes randomly (might stay up for two weeks, then might crash every two days...)
A reboot brings everything back.
The customer knows when the system goes down as they get a voicemail alarm on the reception phone and by this time they can no longer dial out over the SIP trunks and you cant ring in over the SIP trunks either.
They used to have a PRI but they no longer have so its just SIP now for incoming and Outgoing calls.
The PRI card is still plugged in but nothing connected to it
Then we normally log in remotely to it & it does allow us to connect to it via DM then we do a reset (resart) and everything comes back ok.
If you look at the alarm history you can see a SVM NTWK Error
any ideas's what might be causing it to go down.
emeraldpaddy
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2005
Posts: 279 Likes: 1
Member
|
|
Member
Joined: Dec 2005
Posts: 279 Likes: 1 |
With just the above info, it's hard to say what could or would be wrong. I'd start off with the simple stuff, checking that there is no IP conflict with the SVMi card in the rest of their network. Were IP addresses assigned by an I.T. department or person? Don't know if this has been already checked or not, but that's my two cents worth. Good luck.
When I die, I want to go peacefully in my sleep like my grandfather, not screaming and panicking like the passengers in his car.
|
|
|
|
|
Joined: Dec 2010
Posts: 681
Member
|
|
Member
Joined: Dec 2010
Posts: 681 |
It sounds like there is a IP conflict with the SVMi and another device. Also, I would suggest upgrading the software to the latest 4.9x for the 7400. I do believe that the 4.60b had some glitches that have been fixed with the 4.9x. This will also allow for better SIP control between your phone system and provider.
|
|
|
|
Forums84
Topics94,491
Posts639,864
Members49,836
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
213
guests, and
255
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
