|
|
|
|
Joined: Dec 2008
Posts: 20
Member
|
|
Member
Joined: Dec 2008
Posts: 20 |
Our company utilizes an Axxess system (v 11.01) with two nodes, one local and one remote. Currently, at the end of the day our receptionist places the local office system in night mode (via Feature Code 9860 programmed to her DSS). We would also like her to be able to place the remote node into night mode, but it appears there is a separate Feature Code for this (9861) and then yet another to remove night mode on a remote node (9862). I would like to avoid her having to press 2 keys (and enter a network number) if at all possible. Is there any way to place the entire system (all nodes) into night mode with the press of one button?
Thank you for any assistance you might be able to provide!
Jeremy
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2005
Posts: 526
Member
|
|
Member
Joined: May 2005
Posts: 526 |
Never tried it but you might build a personal speeddial for turning on and off and programming a on key and off key for the night. think you would have 3 keys one for day/night (9860) and one with 9861 + and one with 9862 +, might need capital P between 9861 and the network numner. will need to make the keys personal speed dials
Worth a shot, will be intersted in hearing if it works
Randy
|
|
|
|
|
Joined: Dec 2004
Posts: 192
Member
|
|
Member
Joined: Dec 2004
Posts: 192 |
If you were to point trunks for Day and Night on your remote node to a STAR application, you can control the night message and nobody has to push any buttons.
Andrea
|
|
|
|
Forums84
Topics94,526
Posts640,014
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
177
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
