|
|
|
|
Joined: Dec 2008
Posts: 239
Member
|
|
Member
Joined: Dec 2008
Posts: 239 |
Migrated a SV8100 to a SV9100. Every 3 to 4 months the system locks up. No alarms, blade status is normal, reset fixes the problem. Instructed customer to keep a record of what happens. Customer called today and said it happened again. Digital phones were locked up, onsite VOIP phones were fine. Display on the digital phones said "page from kitchen" which seems to be it happened after a phone made a page. Resetting the digital phone would just say "Initialize" and would not come up. Could access Webpro fine and he reset the system from Webpro. No alarms, blade status was normal. Tech support said it may be something with the network but that seems to be fine. In over 20 years experience with NEC I have never seen a bad CPU. Any suggestions would be greatly appreciated...
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
Something is eating CPU cycles. Check for something pinging (DOS attack) the processor. I have seen this with rogue DHCP devices. Check to make sure someone isn't trying to hack into the system from outside also make sure all your VM-email addresses are valid. Your switches/firewall also may have an issue with multicast and need to be set accordingly or changed to unicast. You will need wireshark this. Also make sure the ethernet port you are not using isn't hooked up and is 0.0.0.0. You COULD have a bad processor but I have never seen one either.
|
|
|
|
|
Joined: Feb 2010
Posts: 21
Member
|
|
Member
Joined: Feb 2010
Posts: 21 |
We have had the same issue at a location. Seems to be locking it up when someone does an external page. It is random and has happened a few times the last couple months. This is also a Migration. I am thinking some type of BUG. We upgraded the software. Waiting to se if it happens again.
|
|
|
|
|
Joined: Dec 2008
Posts: 239
Member
|
|
Member
Joined: Dec 2008
Posts: 239 |
Did you upgrade to 8.00.65? I am at that now with the same results. We have done plenty of other migrations without any problems.
|
|
|
|
|
Joined: Apr 2005
Posts: 2,526 Likes: 4
Member
|
|
Member
Joined: Apr 2005
Posts: 2,526 Likes: 4 |
Have you tried instead of power cycling the system pulling the station blade and re-installing it hot?
We get old too soon, smart too late
|
|
|
|
|
Joined: Dec 2008
Posts: 239
Member
|
|
Member
Joined: Dec 2008
Posts: 239 |
Hi Regan. Can you tell me how many phones you have in a Page Group & All Call Group. I talked to Tech. Support and per the manual you should not have more than 50. My customer has close to 70. They never had a problem with the SV8100 but Tech Support says that could be a problem. Just trying to compare notes. Thanks...
|
|
|
|
|
Joined: Jul 2015
Posts: 32
Member
|
|
Member
Joined: Jul 2015
Posts: 32 |
NTAC does not support but if you need more phones in page group than are supported by the system
On the CPU Take mini plug and go from page port to music on hold port
Make port a BGM not Music on hold
turn BGM on on everyones phone you want to hear a page
no limit on phone count.
|
|
|
|
|
Joined: Dec 2007
Posts: 6,834 Likes: 25
Retired Admin
|
|
Retired Admin
Joined: Dec 2007
Posts: 6,834 Likes: 25 |
That's thinking outside the box!
|
|
|
|
Forums84
Topics94,491
Posts639,864
Members49,836
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (SeyerIT, Toner),
275
guests, and
26
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
