web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#627684 02/25/19 12:11 PM
Joined: Apr 2005
Posts: 287
Likes: 1
Keyset6 Offline OP
Member
OP Offline
Member
Joined: Apr 2005
Posts: 287
Likes: 1
I wonder if there's any parameter/setting in the VSVML that needs to be modified to allow it to be used with the IX-VMAC? There's very little information about the IX-VMAC in the manuals I have. Don't see any other switches on the VSVML other than the busyout switch. I have 2 IX-VMAC cards where a good VSVML (that works in a VS) won't activate in an Adix or ECS when mounted on the VMAC.

Last edited by Keyset6; 02/25/19 12:14 PM.
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Keyset6 #627707 02/25/19 07:52 PM
Joined: Aug 2006
Posts: 1,795
Likes: 10
Moderator-Iwatsu
*****
Offline
Moderator-Iwatsu
*****
Joined: Aug 2006
Posts: 1,795
Likes: 10
There is a setting for migrating the VSVML for use with the VMAC.

Open the Omega-Voice VMI System Editor (revision 2.04 or higher).

2. Open a VS-VML profile.

3. Establish a connection with the IX-VMAC.

4. Select the On Line option on the menu bar and select Migrate VS-VML to IX-VMAC.

This is a one-way street- you can't un-migrate the card.

(These instructions are in the Help files in the voice mail programmer. They're not readily apparent..)

Last edited by JBean3329; 02/25/19 07:55 PM.

Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
Keyset6 #627735 02/26/19 04:51 PM
Joined: Apr 2005
Posts: 287
Likes: 1
Keyset6 Offline OP
Member
OP Offline
Member
Joined: Apr 2005
Posts: 287
Likes: 1
Thanks -saw the option, We should confirm our customer will want their voicemail repaired/replaced first since we don't have many VS-VML cards and once it's done you can't go back.

I should be specific - I saw the option with a VS-VML in a VS. I didn't try putting that on a VMAC, installing the VMAC in an Adix M or whatever then establishing communication. I assumed that wouldn't work
since the VS-VMLs I tried won't load, all lights just continue to flash. I could try that next time if that's how it needs to be done.

I've got 2 VMAC cards - didn't think they were actually bad since there's so few components, and didn't think I could have 2 bad ones (they're probably OK)

Last edited by Keyset6; 02/26/19 05:13 PM.
Keyset6 #627744 02/26/19 07:20 PM
Joined: Aug 2006
Posts: 1,795
Likes: 10
Moderator-Iwatsu
*****
Offline
Moderator-Iwatsu
*****
Joined: Aug 2006
Posts: 1,795
Likes: 10
The VS VML128 CF card can be reset to factory settings IIRC.

In any case, they're still available from ICON, the CF cards, that is, relatively cheap as well. Can solve a lot of problems easily. If all you get is flashing lights, that's a sign something has happened to the CF card. No lights at all means the circuit card has probably decided to go home.


Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
JBean3329 #627751 02/26/19 09:39 PM
Joined: Apr 2005
Posts: 287
Likes: 1
Keyset6 Offline OP
Member
OP Offline
Member
Joined: Apr 2005
Posts: 287
Likes: 1
I get the flashing lights with the VS-VML on the VMAC, if I install the same VS-VML in a VS it loads fine. After my previous post, I went home! Not sure if I'll be in the shop tomorrow. To clarify, the VS-VML must be mounted on a VMAC to do the change - or can it be done in the VS? The option was there when it was in the VS. If not, I may be out of luck.

I've defaulted a few of the CF cards that were removed from systems before putting them in stock as spares. Good they're still available and not too expensive.

Keyset6 #627786 02/27/19 03:07 PM
Joined: Aug 2006
Posts: 1,795
Likes: 10
Moderator-Iwatsu
*****
Offline
Moderator-Iwatsu
*****
Joined: Aug 2006
Posts: 1,795
Likes: 10
You can still do the migration when the card is mounted on the VMAC. You connect to the voicemail card itself, regardless of how it's installed in a switch. The migration changes the start-up files to match integration data from the ADIX as opposed to what's coming from a VS. It looks almost the same, but remember that the VS is pretty much already programmed as far as hunt group numbers and extension numbers, whereas an ADIX is built from the ground up.


Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
Keyset6 #627792 02/27/19 04:33 PM
Joined: Apr 2005
Posts: 287
Likes: 1
Keyset6 Offline OP
Member
OP Offline
Member
Joined: Apr 2005
Posts: 287
Likes: 1
Yes - I now see even though the VS-VML didn't activate on the VMAC (The top 4 lights keep flashing) I can communicate with it, see mailboxes, schedules - etc.

Keyset6 #631306 07/22/19 12:19 PM
Joined: Apr 2005
Posts: 287
Likes: 1
Keyset6 Offline OP
Member
OP Offline
Member
Joined: Apr 2005
Posts: 287
Likes: 1
Today I tested a VMAC we obtained, I wanted to add to this post that the VMAC needs to go in slots 1 - 32 only. If replacing a 4VML the logical ports need to moved to the new slot which of course requires a reset.


Moderated by  JBean3329 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5