|
Joined: Aug 2011
Posts: 286
Member
|
OP
Member
Joined: Aug 2011
Posts: 286 |
Hey folks,
I just attended a compromised voicemail system. The hackers had gotten into a couple of the mailboxes (simple passwords) and set the alert notification numbers to the international numbers. Now, the out dial for the mclass and eclass was set to N for all 3 options. I thought that would have kept the notification from happening, but apparently not.
If you aren't using alerts for anything, is there any other repercussion to setting the ports to use to 0?
Thanks in advance,
-B
|
|
|
|
Joined: Dec 2010
Posts: 679
Member
|
Member
Joined: Dec 2010
Posts: 679 |
I would recommend just setting the COS for the VM to not allow international or long distance calls. VM uses COS 01 so you would have to change the other stations to COS 02. Then set toll level for COS 01 to B and make your restrictions. That way if they ever choose to make alert notifications active you don't have to reprogram.
|
|
|
|
Joined: Jan 2010
Posts: 179
Member
|
Member
Joined: Jan 2010
Posts: 179 |
Change the COS to 30 for the VM ports which is internal calls only this will stop it for sure , they would of been able to hack through the message notification ports in the Mclass, these need to set to none and i'm guessing atm they are set to all.
|
|
|
Forums84
Topics93,832
Posts636,785
Members49,649
|
Most Online5,661 May 23rd, 2018
|
|
1 members (nortelvoip),
170
guests, and
19
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|