|
|
|
|
Joined: Dec 2008
Posts: 20
Member
|
|
Member
Joined: Dec 2008
Posts: 20 |
I have an Axxess system (v 11.01) at a remote office that utilizes Off-Node Applications at our central office for VM. Until recently, we have had no problems with our VM. Now, when a station is busy (on an internal call, let's say) and the station is dialed (via DID) by an external caller, the caller receives a busy signal and there is no indication at all on the station that another call is incoming. Before, the external caller would have heard ringing (while the station displayed another incoming call) and then would have been forwarded to VM. All other VM functions are still working with no problems at all. Any help would be greatly appreciated.
Thanks!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2009
Posts: 1,198
Member
|
|
Member
Joined: May 2009
Posts: 1,198 |
Check the station flag DID/E&M Receive Busy Instead of Camp-On. It should be set to No, except for analog devices.
|
|
|
|
|
Joined: Dec 2008
Posts: 20
Member
|
|
Member
Joined: Dec 2008
Posts: 20 |
Just checked that, and it is set to NO for all stations.
|
|
|
|
|
Joined: Aug 2009
Posts: 5
Member
|
|
Member
Joined: Aug 2009
Posts: 5 |
Just curious... If the DID# is dialed when the phone is idle does the call go through and will it go to voicemail?
|
|
|
|
|
Joined: Dec 2008
Posts: 20
Member
|
|
Member
Joined: Dec 2008
Posts: 20 |
Yep, that works perfectly. Just as an FYI - calls are routed through Trunk Groups to stations, we aren't using PRI's for routing groups or anything like that.
|
|
|
|
|
Joined: Aug 2009
Posts: 5
Member
|
|
Member
Joined: Aug 2009
Posts: 5 |
I would try defaulting your phone set ( not the system) look at your feature code list to find out the feature code for defaulting the phone. system > devices and feature codes> feature codes. If that doesnt work send me an email with a contact number. I know this system very well and i believe that i can help you. [email protected]
|
|
|
|
|
Joined: Dec 2008
Posts: 20
Member
|
|
Member
Joined: Dec 2008
Posts: 20 |
Defaulting the stations worked. Thank you so much!
|
|
|
|
Forums84
Topics94,525
Posts640,013
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, AtcomJeff),
187
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
