|
|
Joined: May 2019
Posts: 6
Member
|
OP
Member
Joined: May 2019
Posts: 6 |
Hi folks, new forum user here. Previously had a 7200/7100 configured for SPNET and extension dialing between remote systems working fine for years. Recently had to switch the 7100 to a 7200 for more space and redo the programming. Now SPNET is not working between locations. I have tried my best to get all the settings correct, however when I attempt to dial a remote extension I get Invalid Number displayed.
Is there a specific setup manual for SPNET outside of the normal administrator guide that is available online? The setup is private IP over VPN and the tunnel is good as I can ping and connect to the remote 7200 with device manager. I'm pretty new to phone system programming as well so please be kind.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: May 2019
Posts: 6
Member
|
OP
Member
Joined: May 2019
Posts: 6 |
Getting closer, now it works one way but not the other. Do you have to power cycle the system if you add SystemLink ID or change IP in the SystemLink Table?
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
You don't need to power cycle.
Invalid number means the digits you are sending to the other system don't match an entry in the did table.
|
|
|
|
Joined: May 2019
Posts: 6
Member
|
OP
Member
Joined: May 2019
Posts: 6 |
Thanks, nameless. That was the missing piece! Works like a charm now.
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|