|
|
Joined: Nov 2005
Posts: 645
Member
|
OP
Member
Joined: Nov 2005
Posts: 645 |
I know I am missing something here...I have a CIX 40 where they want the general MB (700) to light 3 phones.
I have a unique phantom ext. with MSG light programmed on each ext. (209 has 410, 206 has 411 and 200 has 412). I have the owner of each phantom programmed as such. I did an on and off template in MB 700 for each phantom - the variable is set to the phantom.
Not working.
I can turn on and off the phantom msg light by doing #63 or #64 and the phantom ext. so the issue is in the VM so I am told, but I cannot figure it out
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
What On/Off template did you use? I think you have to use the SMDI On/Off template.
|
|
|
|
Joined: Jan 2010
Posts: 933 Likes: 1
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 933 Likes: 1 |
What On/Off template did you use? I think you have to use the SMDI On/Off template. You have to create a copy of the COM1 3 Digit and then edit it to use a %V instead of the %E then add the additional extension number into the variable field. Save and add to template list.
Regards Carl
|
|
|
Forums84
Topics93,824
Posts636,752
Members49,644
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
129
guests, and
25
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|