| Joined: Aug 2006 Posts: 23 Member | OP Member Joined: Aug 2006 Posts: 23 | I’ve run into a programming issue that I’ve drawn a blank on. I know I’ve done this before with Centrex lines using #04 I believe. I have a DSUII, POTS (not Centrex)lines, analog (ATI-D) 2 port DOS Corporate Office. I’m trying to transfer to an outside number from a mailbox via a conference call. I’ve gotten the Vmail to make the second call but the two calls are never conferenced together, both lines are on hold instead.
Call Transfer Info Internal External Initiate a Transfer !, ! Complete a Transfer ! 3 way Call !
Both Vmail line ports Yes for outgoing calls.
Mailbox Blind Transfer Destination: 9,5551212,,,,
I’m missing something because I can’t complete a conference call on the analog port using my butt-set, both calls stay on hold and are never connected.
What am I forgetting?
| | | | Joined: Aug 2004 Posts: 9,029 Likes: 1 Admin | Admin Joined: Aug 2004 Posts: 9,029 Likes: 1 | Been a long while but I seem to remember it was no problem with Centrex lines. However using regular POTS lines I could only make it work on DOS Corporate Offices that had Dialogic cards not Rhetorex. | | |
27 members (bdunne, Joe Talbot, nonameyet, MartinE, Curlycord, Scotty Woods, justbill, KRRath, Bob3470, hitechcomm, nfcphoneman, grich, newtecky, Touch Tone Tommy, skip555, dexman, pvj, Rob Jordan, Iwatsu Guru, JBean3329, BobRobert, sketchypro, metelcom, MooreTel, FixYaBrokeStuff, Skunky, nortelvoip),
484
guests, and
50
robots. | Key: Admin,
Global Mod,
Mod | | Forums94 Topics94,195 Posts638,625 Members49,403 | Most Online5,661 May 23rd, 2018 | | | |