sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems CTX-100 / IES-32 SETUP

You still need to make your adjustments in Stratagy Admin since you still need to define the extension numbers to the ports in the Stratagy database. From the main menu go to Configuration-->Telephone System Integration. At the bottom part of the screen scroll down until you see the IP address of the CIX. Make the change. Then click the Voice Ports tab and define the extension numbers 51-54 for each of the Stratagy ports. Reboot or restart the Stratagy service. It's in the I&M manual page 11-4.

I believe that changes the Laptop's IP Add. What about the IES-32 IP Add.? Where is it buried in the Registry of the VM unit?

My IES-32 VM Unit doesn't show any more lines below (No. of milliseconds to use for Flash time=550) in the configuration - integration page of setup. In looking around if I set Interrogation Type to (CTX Proprietary) those boxes show up. I still think I need to get the IP of the VM reset to 198.162.254.252 so it communicates with the CTX which is at 192.168.254.253. My laptop is at 192.168.254.250.

If your voicemail iES-32 is not already set at the default, you change it through remotely connecting to the Windows desktop of the Stratagy. The Stratagy iES-32 has Windows NT, which is a little similar to Windows XP for changing the IP address

I checked one of my customer's systems for the specific steps

Start - Settings - Control panel
Network Icon
Prototcol Tab
TCP/IP protocol - Properties

Specify the IP address for the voicemail

When you connect to it through Netmeeting, are you using 192.168.1.103?

I am going to send you a PM with a setup guide showing screen shots of the SMDI integration needed in the iES32.

Reply to NEWTECKY --- I can get into netmeeting and the regedit of the IES-32 just don't know where to find the spot to set the IP of the VM back to factory default. My CTX and the IES-32 are not set on the same IP Add. group. CTX = 192.168.254.253 IES-32 = 192.168.1.103
Reply to CARLOS#1 -- I got the IES Supplement -- changed a couple things still not working.

The iES32 is running an embedded version of Windows NT so you have to Netmeeting into it on the 192.168.1.103 address and then go to
Start - Settings - Control panel
Network Icon
Prototcol Tab
TCP/IP protocol - Properties and set the IP address to 192.168.254.252 with subnet 255.255.255.0 and click save

This will set the new IP address and you will get disconnected from the iES32
Change your IP on the laptop and reconnect the Netmeeting on the new IP of 192.168.254.252
You will want to reboot the iES32 so that it is all working on the new IP address.

The SMDI from the CIX system will need to be set to use the 192.168.254.252 as well in P801