web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Apr 2018
Posts: 151
Member
OP Offline
Member
Joined: Apr 2018
Posts: 151
Hi everyone!

I just scored my second WECO 551B KSU with a 118a Frequency generator. My question is, any way to wire up a switch or a relay at the KSU to select ether ringing with the 118a Frequency generator or just buzzers for incoming calls. If so, what modifications would I have to make to the wiring at the block. I would like to have the option to switch to ether ringing or buzzing for incoming calls.

Personally I like the sound of the buzzers when a call comes in but I do not want to have the 118a Frequency generator to go to waste...... especially since it has the rare bracket...


I would appreciate any ideas and feedback.

[Linked Image]


Thanks

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: May 2007
Posts: 5,058
Likes: 5
Moderator-1A2, Cabling
*****
Offline
Moderator-1A2, Cabling
*****
Joined: May 2007
Posts: 5,058
Likes: 5
If you wire 10 or 18VAc to the RB/RG leads (where your 118 is wired) and put buzzers in the phone and connect that pair to the RG/RC leads, you'll get buzzers buzzing on incoming ring.

A relay or switch could switch the proper ringing current onto the RB/RG leads while simultaneously switching the buzzer/ringer pairs onto RG/RC.

Sam


"Where are we going and why are we in this hand basket?"
Joined: Jan 2017
Posts: 104
Member
Offline
Member
Joined: Jan 2017
Posts: 104
I made such switch on my 551C. But I use ringing generator with DC12V supply (from lamp/buzzer AC10V via a rectifier). So in my case it is just switching 1 contact to where the AC10V should come: to buzzers loop or to feed the ringing generator. I wired this switch to a control relay in the PBX, so I can switch buzzers to ringers and back remotely from any station by dialing the relay switch code. Alternatively it can even be controlled automatically via timer. But I do not need such.

Joined: Dec 2002
Posts: 9,423
Likes: 1
Member
*****
Offline
Member
*****
Joined: Dec 2002
Posts: 9,423
Likes: 1
very cool!


Jeff Moss

Moss Communications
Computer Repair-Networking-Cabling
MBSWWYPBX, JGAE
Joined: Apr 2018
Posts: 151
Member
OP Offline
Member
Joined: Apr 2018
Posts: 151
hey RedBul ,

Would you mind posting some pics or a video of this setup, I would love to see it.

Joined: Jan 2017
Posts: 104
Member
Offline
Member
Joined: Jan 2017
Posts: 104
Hi, I believe I’ve published it here couple of years ago, when I made the assembly of that KSU. But the old photos disappear somehow from the image hosting. I will make new and place the here.

Joined: Jan 2017
Posts: 104
Member
Offline
Member
Joined: Jan 2017
Posts: 104
Here you are!

For this KSU I’ve built a small “option module” which contains 12V powered ring generator and a simple power supply for it:
[Linked Image from i.postimg.cc]

Power supply is just a diode bridge rectifier coupled with filter capacitor and a control light bulb. Because it takes power from the same 10V AC lamp source as buzzers, it is easy to switch between buzzers and ringer: simple 2 positions relay to either supply 10V AC to the ringer generator or directly to the buzzers pair to the telephone cabling:
[Linked Image from i.postimg.cc]

Also a safety 300 Ohm resistor is added in series with ringing output - it is not obligatory, but recommended to protect the ringer generator from short circuit on the ringer pair in the floor cabling.

There are no modifications done to this KSU itself with this option. The whole board is fixed using 1 screw through the standard ring generator mounting bracket hole and connected to the non-modified 66 block of 551C KSU with regular wires.

So far based on 2-3 years of using this system it proved to be reliable and the ringer generator is sufficient to power 4-5 phones at minimum, which is enough for most applications of 551-type KSUs. I have one ringing phone per floor in my house which is more than enough when it rings. There is also a plan to connect a central ringer (Western Electric “Chime” ringer) on the same pair to announce the call on the staircase.

Overall view of the system:
[Linked Image from i.postimg.cc]

Joined: Feb 2005
Posts: 12,342
Likes: 3
Member
***
Offline
Member
***
Joined: Feb 2005
Posts: 12,342
Likes: 3
I think I would have found a better place to put that so it doesn't cover the block.

-Hal


CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
Joined: Jan 2017
Posts: 104
Member
Offline
Member
Joined: Jan 2017
Posts: 104
Thanks for critics, but I do not touch that part of 66 block ever since I’ve punched down the incoming lines and ringers/buzzers. It is rather a question of cosmetic or aesthetic considerations - or personal taste. Even if I need access to the entire 66 block it is only one screw to loose and then the whole thing can be turned up or down, opening access to all rows of contacts.

But for sure you can find an alternative place as well. E.g. each 551C KSU has a provision for a fifth 400-type line card just missing the card connector and wiring (horizontal slot below the four vertical slots for KTUs and above the interruptor). I suspect there was a plan at Bell Labs to furnish 551C with 5-lines capabilities, however it was abandoned due to not enough space on the 66 block and the use of liquid Mercury contact relay in the later 400-type line cards, which should be only installed vertically.

In principle, anyone can add the 400-type line card connector there and wire it to a small extra 66-type block. Alternatively this ringer card can be cut to fit that slot.

Because I considered adding the fifth line to this KSU (before acquiring 584C panels and Call Director sets), I didn’t bother to look for another place for the ringer option. Now this is not needed on that KSU.

Last edited by RedBul; 10/30/19 03:38 PM.
Joined: Feb 2005
Posts: 12,342
Likes: 3
Member
***
Offline
Member
***
Joined: Feb 2005
Posts: 12,342
Likes: 3
How about in a box external to the KSU?

-Hal


CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
Page 1 of 2 1 2

Moderated by  ChrisRR, EV607797, Silversam 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,707 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
pvj 4
Who's Online Now
2 members (Toner, Touch Tone Tommy), 150 guests, and 233 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5