| | Joined: Oct 2019 Posts: 2 Member | OP  Member Joined: Oct 2019 Posts: 2 | I have a backup from a Vodavi XTS MPB1. The MPB1 is going bad. Can I upload that programming into an MPB2 that is running the same software level? | | | | | Joined: Oct 2004 Posts: 1,480 Member | | Member Joined: Oct 2004 Posts: 1,480 | I would use Windba a convert it so your flex codes don't get screwed up. | | | | | Joined: Oct 2019 Posts: 2 Member | | OP Member Joined: Oct 2019 Posts: 2 | By this, I assume you mean, open the DBA and create an MPB2 DBA, then choose to download my backup into the MPB2 DBA. After the error correcting, then upload the programming from the DBA to the new MPB2 processor. | | | | | Joined: Feb 2009 Posts: 3,129 Moderator-Vodavi, Vertical, XBlue | | Moderator-Vodavi, Vertical, XBlue Joined: Feb 2009 Posts: 3,129 | Sounds good to me. You don't have anything to lose. Especially if you have a bench test KSU. But most of the MPB failures are simply due to an old memory support battery that needs replacement.
- Dave S. -
You can never appease your ideologue opponents.
| | | |
20 members (dexman, Professor Shadow, nonameyet, Ruben, Meyery2k, Bob3470, sundance, Touch Tone Tommy, Curlycord, OBT, justbill, Yoda, BTS01, morephones, nortelvoip, JBean3329, BobRobert, Keyset6, MooreTel, metelcom),
174
guests, and
38
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums94 Topics94,178 Posts638,517 Members49,397 | | Most Online5,661
May 23rd, 2018 | | |
|
