web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Nov 2019
Posts: 7
lizhou Offline OP
Member
OP Offline
Member
Joined: Nov 2019
Posts: 7
I have a NEC SL1100 phone system. I am trying to use the phone to control the magnetic lock installed in the front door. I have setup the door phone, when door phone is talking to the individual phone, I would like to have the "flash" key to unlock the magnetic lock, but I have problem to get it working. Anyone can provide me information how to wire to the maglock? Thanks in advance.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Sep 2004
Posts: 4,194
Likes: 2
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 4,194
Likes: 2
Look in the Sl1100 hardware manual.

Joined: Nov 2019
Posts: 7
lizhou Offline OP
Member
OP Offline
Member
Joined: Nov 2019
Posts: 7
Could you give me specific instruction? I have looked into the manual for setup all other features I need, but I could not find this one. I would like to know from which port of the SL1100 to connect to the maglock. Thanks

Joined: Sep 2004
Posts: 4,194
Likes: 2
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 4,194
Likes: 2
You have to hook up the relay to trigger the mechanism. This is fairly standard stuff.

Joined: Apr 2005
Posts: 2,498
Likes: 2
Member
*****
Offline
Member
*****
Joined: Apr 2005
Posts: 2,498
Likes: 2
SL1100 hardware manual, in the table of contents section go to installing multi line telephone and optional terminals, here you will find installing the door unlock devices.


We get old too soon, smart too late
Joined: Nov 2019
Posts: 7
lizhou Offline OP
Member
OP Offline
Member
Joined: Nov 2019
Posts: 7
I did see that section 5.6 in the hardware manual, installing the door unlocking devices. I connect the pin 4-5 (relay 1) to the power supply control port "Push" and portal "GND", which should control the maglock. when I hit "flash" key on the phone, it won't unlock the maglock. I am pretty new to the system, and I might do something obviously wrong. Please kindly help to give me more detailed instruction on how to connect the wire and how to set the settings. Thanks in advance.

Joined: Apr 2005
Posts: 2,498
Likes: 2
Member
*****
Offline
Member
*****
Joined: Apr 2005
Posts: 2,498
Likes: 2
Did you follow all the programming in the feature and specks manual?


We get old too soon, smart too late
Joined: Sep 2004
Posts: 4,194
Likes: 2
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 4,194
Likes: 2
You have to be on a door phone call.


Joined: Nov 2019
Posts: 7
lizhou Offline OP
Member
OP Offline
Member
Joined: Nov 2019
Posts: 7
Yes, I have the door phone installed correctly and it is working.
From SL1100 system, RY1/2 jack, I have pin 2,7 for door 1, ping 4,5 for relay 1. The lock is connected to a power supply control, which has Push, GND, 12+, COM, NC+. Anyone can tell me how the wire from RY1/2 connected to the power control?

Joined: Sep 2004
Posts: 4,194
Likes: 2
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 4,194
Likes: 2
It should be a simple relay closure. You should be able to short the pairs and trigger the lock. If that doesn't work the relay will never work til you get that sorted out.

http://www.necsl1100distributors.com/mm5/downloads/resources/SL1100-Door-Phone-Installation.pdf

Did you test the relay with a continuity tester to see if it's shorting when you press the flash key when you are on an active door phone conversation?

Page 1 of 2 1 2

Moderated by  ttech 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,709 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 12
TDKs79 8
pvj 4
Who's Online Now
1 members (Curlycord), 120 guests, and 246 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5