|
|
Joined: Nov 2019
Posts: 7
Member
|
|
Member
Joined: Nov 2019
Posts: 7 |
I have a NEC SL1100 phone system. I am trying to use the phone to control the magnetic lock installed in the front door.
I have setup the door phone, when door phone is talking to the individual phone, I would like to have the "flash" key to unlock the magnetic lock, but I have problem to get it working.
Anyone can provide me information how to wire to the maglock? Thanks in advance.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
Look in the Sl1100 hardware manual.
|
|
|
|
|
Joined: Nov 2019
Posts: 7
Member
|
|
Member
Joined: Nov 2019
Posts: 7 |
Could you give me specific instruction? I have looked into the manual for setup all other features I need, but I could not find this one. I would like to know from which port of the SL1100 to connect to the maglock. Thanks
|
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
You have to hook up the relay to trigger the mechanism. This is fairly standard stuff.
|
|
|
|
|
Joined: Apr 2005
Posts: 2,526 Likes: 4
Member
|
|
Member
Joined: Apr 2005
Posts: 2,526 Likes: 4 |
SL1100 hardware manual, in the table of contents section go to installing multi line telephone and optional terminals, here you will find installing the door unlock devices.
We get old too soon, smart too late
|
|
|
|
|
Joined: Nov 2019
Posts: 7
Member
|
|
Member
Joined: Nov 2019
Posts: 7 |
I did see that section 5.6 in the hardware manual, installing the door unlocking devices. I connect the pin 4-5 (relay 1) to the power supply control port "Push" and portal "GND", which should control the maglock. when I hit "flash" key on the phone, it won't unlock the maglock. I am pretty new to the system, and I might do something obviously wrong. Please kindly help to give me more detailed instruction on how to connect the wire and how to set the settings. Thanks in advance.
|
|
|
|
|
Joined: Apr 2005
Posts: 2,526 Likes: 4
Member
|
|
Member
Joined: Apr 2005
Posts: 2,526 Likes: 4 |
Did you follow all the programming in the feature and specks manual?
We get old too soon, smart too late
|
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
You have to be on a door phone call.
|
|
|
|
|
Joined: Nov 2019
Posts: 7
Member
|
|
Member
Joined: Nov 2019
Posts: 7 |
Yes, I have the door phone installed correctly and it is working.
From SL1100 system, RY1/2 jack, I have pin 2,7 for door 1, ping 4,5 for relay 1. The lock is connected to a power supply control, which has Push, GND, 12+, COM, NC+. Anyone can tell me how the wire from RY1/2 connected to the power control?
|
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
It should be a simple relay closure. You should be able to short the pairs and trigger the lock. If that doesn't work the relay will never work til you get that sorted out. http://www.necsl1100distributors.com/mm5/downloads/resources/SL1100-Door-Phone-Installation.pdfDid you test the relay with a continuity tester to see if it's shorting when you press the flash key when you are on an active door phone conversation?
|
|
|
|
Forums84
Topics94,521
Posts639,995
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Gary S.),
217
guests, and
42
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
