| | Joined: Nov 2019 Posts: 3 Member | OP  Member Joined: Nov 2019 Posts: 3 |
I have an iDCS 100 system I am attempting to restore. MGI3 card installed and configured properly with network address also with extensions 3201-3208 configured for IP phone sets. When attempting to connect either an ITP-5021D or ITP-5121D phone to the system results in a "Registration Lock" error on the phone. Phone parameters have been set correctly with the Server IP, System ID, Password, etc. Any thoughts on what is causing the registration lock on these phones and how to correct it? Thanks in advance.
| | | | | Joined: Jun 2006 Posts: 2,842 Moderator-Samsung |  Moderator-Samsung Joined: Jun 2006 Posts: 2,842 | There's a setting in mmc841 from memory, where you can enable/disable ip phone registration. I can't remember if it's in the 100 or only 7000 series. | | | |
40 members (Curlycord, justbill, RATHER BE FISHING, sundance, Yoda, ffej010, Professor Shadow, newtecky, nortelvoip, dexman, abarmin, BTS01, scanjet, hbiss, JBean3329, barnito, Joel J., dans, mbhydro, Bushmills, Ruben, sketchypro, iatech3800, nameless, Murray, JoeMiller, telecom guy10, hitechcomm, nfcphoneman, GDRoach, Mercenary Roadie, Tip&Ring, Hofman telekom, Meyery2k, Gary S., FoneJacker, Touch Tone Tommy, Carl Navarro, KRRath, BforBENDETTA),
457
guests, and
52
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums94 Topics94,182 Posts638,543 Members49,398 | | Most Online5,661
May 23rd, 2018 | | |
|
