Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#635914 03/17/20 03:09 PM
Joined: Oct 2008
Posts: 297
conxtel Offline OP
Member
OP Offline
Member
Joined: Oct 2008
Posts: 297
Has anybody seen an IP version of the PGD (or equivalent)? What does everybody else do with external paging in locations where there is no copper cabling back to the system?

Customer has the SV9100 in their main office and at their second building, that is fed via a point to point wireless system, they are using all IP phones. What we have done in the past is place a phone near the amplifier and connect off the internal speakers to the amplifier input. It works but is a waste of a phone.

Anybody find anything that works well?

EMP & Lightning Home Surge Protection
EMP - Click Here!
conxtel #635915 03/17/20 03:38 PM
Joined: Sep 2004
Posts: 3,963
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 3,963
This company I have had luck with especially on Door Phones.
http://www.algosolutions.com/products/speakers/8373.html

conxtel #635916 03/17/20 04:04 PM
Joined: Sep 2004
Posts: 3,963
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 3,963
Just FYI I have thought about getting a Raspberry PI installing droid software OS and using an MLC client on it to see if I could get by all this. I think they even make them to run off a POE switch as well..

conxtel #635917 03/17/20 05:39 PM
Joined: Mar 2014
Posts: 364
Member
Offline
Member
Joined: Mar 2014
Posts: 364
We have had some good success with the SNOM 3rd party IP unit.

conxtel #635920 03/17/20 07:21 PM
Joined: Oct 2006
Posts: 1,310
Member
Online Content
Member
Joined: Oct 2006
Posts: 1,310
I have a Valcom VIP-801A in use in that exact same situation. Been in place for a few years and works great. Easy to setup.
Valcom VIP-801A

Been a while since I was there, but if I remember correctly, the PGD outputs to the Valcom unit. Users can press the page key on their phone, then enter either 1 or 2 for the zone (building).

There is a unit at each building.

Jim

Last edited by Yoda; 03/17/20 07:33 PM.

Moderated by  DrPbx, ttech 

Link Copied to Clipboard
Most Recent 5 Post
Konftel Speaker Phone on SV9100
by teldata1 - 01/15/21 11:56 AM
Common Problem, Unexpected Solution
by ChrisRR - 01/15/21 02:31 AM
phone does not transfer to voicemail
by Duane F. - 01/14/21 11:16 PM
Night mode no answer timer
by Yoda - 01/13/21 09:50 PM
InUC SV9100
by pete83uk - 01/13/21 02:26 PM
Who's Online Now
38 members (ChrisRR, Carl Navarro, justbill, nortelvoip, Yoda, johno, JBean3329, Brian A, hitechcomm, Bushmills, Ruben, Duane F., EV607797, Curlycord, newtecky, JoeMiller, RM SYSTEMS, nameless, dans, Bob3470, Touch Tone Tommy, BadaBing, Meyery2k, BTS01, Professor Shadow, KRRath, RATHER BE FISHING, ChrisNI, Hofman telekom, CyberLaw, extelcomm1, nfcphoneman, FdTech, vicbob, metelcom, MooreTel, Silversam, teldata1), 523 guests, and 47 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics94,177
Posts638,513
Members49,397
Most Online5,661
May 23rd, 2018
Today's Birthdays
bkinney, FMT8, Kalash
Newest Members
Hopedpocketts, JoeMiller, Ricardo, Radioactive64, irajacobs
49,397 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
Top Posters (30 Days)
dexman 34
Yoda 20
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Sold AD
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners