|
|
|
|
Joined: Oct 2006
Posts: 1,417 Likes: 7
Member
|
|
Member
Joined: Oct 2006
Posts: 1,417 Likes: 7 |
I have an old CICS system with software version SP: 30DHCC04 NAT.
It doesn't offer me the Feature Assignment in Telco Features, for caller ID. I suspect this version doesn't support caller ID? I did use a CI LSDS card.
Thanks.
Jim
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Feb 2005
Posts: 1,615 Likes: 1
Member
|
|
Member
Joined: Feb 2005
Posts: 1,615 Likes: 1 |
30DHC04
CICS 7.0 (SIP) STD, IRAD-ON, AA PROG PROMPTS (8X16/24)
This supports CLID
Under Terms&Sets, not it's own heading.
Under Terms&Sets/Telco Features you should see these headings inside :
Feature Assignment
Caller Log Set
Ext Mesg
1st Display
Called ID
Log Space
" I did use a CI LSDS card"
It's one or the other,not both.
So you have either:
LSDS (no caller id)
or a
CI (Caller ID)
|
|
|
|
|
Joined: Oct 2006
Posts: 1,417 Likes: 7
Member
|
|
Member
Joined: Oct 2006
Posts: 1,417 Likes: 7 |
Thanks again Curleycord. It has been quit a while since I did caller ID on one of these.
I used a CI card.
Thanks.
Jim
|
|
|
|
Forums84
Topics94,571
Posts640,216
Members49,873
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
45
guests, and
52
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image from telcopc.ca]](https://telcopc.ca/files/pics/small-logo-sig.png){kind=logo}