Phone Systems

Sponsored by Atcom
Get a free phone!
Previous Thread
Next Thread
Print Thread
Rate Thread
#640912 05/17/21 12:45 AM
Joined: Jan 2009
Posts: 817
ffej010 Offline OP
Member
OP Offline
Member
Joined: Jan 2009
Posts: 817
Working on a new setup (IP500 R11) which will use primarily J159 and J179 SIP phones.
I would like to edit the configuration so that if a phone is reset, it will come back up and enable the "Internal Auto-Ans" and also disable "Button Clicks." I have played around with various settings on the 46xxsettings file, but can't seem to get the file to take...or it breaks everything else. Anyone have a guide on those two settings and how I can get them set permanently?

Atcom VoIP Demo
Get a VoIP Demo Today
ffej010 #640913 05/17/21 01:45 PM
Joined: May 2004
Posts: 1,630
Moderator-Avaya
*****
Offline
Moderator-Avaya
*****
Joined: May 2004
Posts: 1,630
What you need to do is allow the default 46xxsettings file. Then edit that. That is not recommended though, as things change in the config that will change the default settings file. For this reason, they created the 46xxspecials.txt file.

An alternate way, would be to add a short code to the users....which addresses the Internal Auto Answer:

*DCP
Dial
40000000,0,X,Y,0
l/g 0

(X affects internal calls and Y affects external calls)


With the digit set to “1”, this is normal operation.

With the digit set to “2”, this will give 3 beeps (heard by both parties) and answer the call.

With the digit set to “3”, the agent will get 1 ring cycle, and the call is answered, with the external party not hearing anything…

ffej010 #640915 05/18/21 03:21 PM
Joined: Jan 2009
Posts: 817
ffej010 Offline OP
Member
OP Offline
Member
Joined: Jan 2009
Posts: 817
They would like it to always be enabled. I have never messed with the 46xxspecials.txt file, but doing a little reading on it, looks like that is the way to go.
Problem I have, is I don't know the exact parameter that needs to be manipulated in the file to change this setting.

ffej010 #640916 05/18/21 03:41 PM
Joined: May 2004
Posts: 1,630
Moderator-Avaya
*****
Offline
Moderator-Avaya
*****
Joined: May 2004
Posts: 1,630
I dont think there is a setting in the 46xx file.
I would use the above, or create a short code. Dial extension, and the phone rings, dial star and extension, it will go to speakerphone:
S.C. *2xx
T.N. 2N
Feature DialDirect

Press *201, it places a speakerphone call...just dial 201, and the set rings...

ffej010 #640917 05/19/21 04:01 AM
Joined: Jan 2009
Posts: 817
ffej010 Offline OP
Member
OP Offline
Member
Joined: Jan 2009
Posts: 817
I had tried that very same shortcode (using direct dial) and that is when I discovered that Internal Auto Answer on the J179 phone was off. The phone just rang like a normal intercom call. When I turned the Auto Answer on from the phone, then the Dial Direct worked as expected. However, if the phone reboots, then Auto Answer is disabled again (and button clicks re-enabled). I was hoping that there was a setting in the file that addressed both of those settings, but it isn't looking like there is.

ffej010 #640942 05/24/21 06:17 PM
Joined: May 2004
Posts: 1,630
Moderator-Avaya
*****
Offline
Moderator-Avaya
*****
Joined: May 2004
Posts: 1,630
I am sorry, no time to lab this up. I would go with the first option...Create a user short code with the below

*DCP
Dial
40000000,0,X,Y,0
l/g 0

(X affects internal calls and Y affects external calls)


With the digit set to “1”, this is normal operation.

With the digit set to “2”, this will give 3 beeps (heard by both parties) and answer the call.

With the digit set to “3”, the agent will get 1 ring cycle, and the call is answered, with the external party not hearing anything…

ffej010 #640947 05/26/21 03:02 AM
Joined: Jan 2009
Posts: 817
ffej010 Offline OP
Member
OP Offline
Member
Joined: Jan 2009
Posts: 817
I haven't been able to dive too deep into this either. I'll sure give this option a look and see if the subscriber likes the solution.

Thanks for the suggestion!


Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,629
Posts635,879
Members49,589
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
Abcomm, n1cn0c, nicnoc, reataylor
Newest Members
TVCTech, joe angi, TommyKay, 電信小吳, Partswatch
49,589 Registered Users
Top Posters(30 Days)
dexman 10
Toner 8
Yoda 5
dans 5
Who's Online Now
1 members (BobRobert), 7 guests, and 10 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Best VoIP Phones | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5