Phone Systems

Sponsored by Atcom
Get a free phone!
Previous Thread
Next Thread
Print Thread
Rate Thread
#642795 05/24/22 03:34 PM
Joined: Feb 2010
Posts: 424
Member
OP Offline
Member
Joined: Feb 2010
Posts: 424
I am at a cutomers site with an ongoing issue with RCN


SL1100 with PRI (Partial ) 7.21

cant make any calls out on PRI Trunks

incoming seems to work fine


RCN in process of setting up vender meet just wondering if it could have anything to do with system

I dont believe it was installed be an NEC Dealer



using Adtran rebooted all devices so far RCN dosent seem to have good diagnostic from far end


I can grab the channel and then the call drops and I get a slow busy signal



any thoughts


JD

Atcom VoIP Demo
Get a VoIP Demo Today
Joined: Feb 2010
Posts: 424
Member
OP Offline
Member
Joined: Feb 2010
Posts: 424
This may be a partial PRI not sure if this matters as far as programming goes RCN cant tell me

Joined: Feb 2010
Posts: 424
Member
OP Offline
Member
Joined: Feb 2010
Posts: 424
not sure if a partial PRI requires the PRI card to match the number of channels


its currently set up as a squared key system


it looks like the had pots line 1-8 at one time and added PRI Card 9-32

the phones have 9-14 on the 6 keys on the phone


incoming works fine

outgoing is a problem

Joined: Sep 2004
Posts: 4,072
Member
*****
Online Content
Member
*****
Joined: Sep 2004
Posts: 4,072
I can tell you it's programmed wrong already. You need to be using CAP keys and they need to be unique. Trunk groups need to be assigned and you should be using PARK keys using dial 9 to get outside calls. Trunks need to be set to DID. I cannot tell you how many systems I have to re-program even from new NEC certified techs. Make sure you know how big of a PRI you have and make sure the trunk group is set accordingly. Squared systems using PRI is a huge no no.

Joined: Oct 2012
Posts: 248
Member
Offline
Member
Joined: Oct 2012
Posts: 248
Is this a new issue? Or has it been a problem since installation? If it's been going on since installation, probably just an issue with configuring the proper number of channels on the PRI. If the carrier can't figure out how they provisioned it - may be a sign to change carriers!! In the meantime, you can program lines keys on a phone for all 23 channels to figure out which ones are working and how many active channels to program. Unique CAP keys are SV programming and not SL - I would use Loop keys and Park keys rather than squaring - minor training issue for customer - saves a lot of real estate on your buttons. If it's a new issue, I would make sure the carrier has reset the D channel. If you get a vendor meeting, make sure the ticket states the tech needs to bring a T-Berd - oddly, this is not always apparent to the service coordinator.


www.highspeedtele.com
Dallas & Fort Worth, TX
Joined: Feb 2010
Posts: 424
Member
OP Offline
Member
Joined: Feb 2010
Posts: 424
I’m just getting back to this thread now
I gave up the carrier didn’t seem to be interested in anything I think we’re going to sell them a Hosted Phone system
that was the first time I was at that site
I’m assuming everything worked at one point

Yeah that’s the first thing I saw thought of when I was working on the phone system about the cap keys but then on the SI 1100 you don’t use cap keys

The carrier couldn’t even tell me if it was a full PRI or a partial PRI they just said it’s being billed as a partial PRI very strange

They were getting incoming calls just no outgoing and the incoming calls were coming in on channel 1

We never set up a vender meet Nobody seem to wanna play ball I was going to bring another phone system out to test but like I said I think they’re gonna try to go with a Hosted solution

Crazy 😜


Moderated by  ttech 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,579
Posts635,605
Members49,577
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
Ashley, Bob Truitt, JALinker, Leeb
Newest Members
chyc, LostieWitness, djringjr, ScottRSA, Adam B
49,577 Registered Users
Top Posters(30 Days)
Toner 17
bobw 11
dexman 6
Who's Online Now
3 members (jeffmoss26, Coral Tech, muddybl), 12 guests, and 12 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Best VoIP Phones | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5