|
|
Joined: Jun 2022
Posts: 3
Member
|
OP
Member
Joined: Jun 2022
Posts: 3 |
Does anyone know of a way to do external paging from the ST500 app? It's an NEC app but uses a 3rd party SIP license. I am unable to use any of the service codes such as 703 for paging. Any suggestions?
|
|
|
|
|
Joined: Sep 2004
Posts: 4,072
Member
|
|
Member
Joined: Sep 2004
Posts: 4,072 |
|
|
|
|
|
Joined: Jun 2022
Posts: 3
Member
|
|
OP
Member
Joined: Jun 2022
Posts: 3 |
Those only work from an MLT or SLT. They won't work from a SIP phone.
|
|
|
|
|
Joined: Sep 2004
Posts: 4,072
Member
|
|
Member
Joined: Sep 2004
Posts: 4,072 |
I just activated X-Lite SIP client on my test 9100 system and had no issue paging using *10. You might want to contact NTAC to see if you are missing something. SIP clients are usually just glorified analog phones.
|
|
|
|
|
Joined: Jun 2022
Posts: 3
Member
|
|
OP
Member
Joined: Jun 2022
Posts: 3 |
I will do that. Thank you. I wonder if it's just a difference on the 2100 and the 9100. I'm installing it in the morning. I will try it with xlite and see if there's a difference from the NEC app.
|
|
|
|
|
Joined: Sep 2004
Posts: 4,072
Member
|
|
Member
Joined: Sep 2004
Posts: 4,072 |
Remember SIP phones/programs almost always have to hit send after dialing.
|
|
|
|
Forums84
Topics93,579
Posts635,612
Members49,577
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
