Replacing BIPU-Q1A

Print Thread

Rate Thread

Replacing BIPU-Q1A #645361 08/30/23 07:32 PM
Joined: Mar 2007 Posts: 53 Oregon jc2it Member
jc2it Member Joined: Mar 2007 Posts: 53 Oregon	We had a BIPU-Q1A which failed that was used to connect our CTX670 to 3 remote CTX100 systems. To me this BIPU-Q1A unit looks like it keeps restarting. At least the Light pattern keeps repeating between the NIC lights and the HB light. I had purchased a spare in the past and it looks like it was DOA. The HB light doesn't blink. I have one on order. What is the procedure for replacing it. Is it swap in/out and done or does the CTX670 need to be rebooted first? Thanks!

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: Replacing BIPU-Q1A jc2it #645363 08/30/23 07:40 PM
Joined: Jan 2010 Posts: 937 Likes: 5 Sydney Australia Carlos#1 Moderator-Toshiba
Carlos#1 Moderator-Toshiba Joined: Jan 2010 Posts: 937 Likes: 5 Sydney Australia	Have you tried to re-flash the firmware? As for replacing it just power off the system and swap out the card and power back on. The configuration is held in the CPU and not in the BIPUQ card. Regards Carl
	1 member likes this: jc2it

Moderated by Carlos#1, phonemeister

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems Replacing BIPU-Q1A