sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems SPNET vs DND Override

is this a bug in SPNET or is there a fix for this?
Using SPNET between two systems... 7400 and 7200s both with 5.01.
User in PBX2 sets DND on his phone but users in PBX1 can still ring his phone.
I've made changes in Network COS to disable DNDO, but made no change.

Bug?

Is ccbs and ccna turned on in network cos on both ends?

Yes.

Also, same system does some quirky things like; not saving last changes and random alarms on random phones - but with no visual notification on displays as to what alarm is ringing.

If that is the os7400 then I've seen that when you don't initialise them properly.

Backup the programming.
Clear the sd/mmc backup (mmc815)
Power down,
take out the mp40,
turn off the memory switch
Turn system on
Wait for it to start
Turn off
Turn on the mp40 memory switch
Turn on system and restore backup

That usually fixes things like that with 7400's

Yeah. Did that once or twice for the random alarms. Which didn't seem to clear that problem although it did go away from what my friend tells me.
It just started doing the loss of changes fairly recently. But that may have just shown up since someone put the power cord on the surge only side of the UPS... ?! Just found that out today.
So it may have had this issue all along.

The DND issue. CCBS and CCNA should be on then for the DND to actually block the caller along with DNDO being on?