|
Joined: Jul 2011
Posts: 3
Member
|
OP
Member
Joined: Jul 2011
Posts: 3 |
Hello everyone,
I am doing a study of the thermal load of the data room at a company that has an Inter-Tel axxess version 4.4. It has two cabinets, each with the 550.0110 "9A power supply". My question is, does anyone have access to any data regarding either the wattage these systems consume, or better yet BTU output of these systems in a datacenter environment? I have the distinct feeling that the "9A" figure won't help figure this out, as I am guessing that is on the DC side and there are a selection of voltages. Thanks!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: May 2009
Posts: 1,198
Member
|
Member
Joined: May 2009
Posts: 1,198 |
I've always calculated BTU based on the component wattage, as listed in the installation manual.
|
|
|
|
Joined: Jul 2011
Posts: 3
Member
|
OP
Member
Joined: Jul 2011
Posts: 3 |
@DND ON - I would love to do so, but I do not have a copy of the installation manual. Can you by chance point me toward an online copy, or if you happen to have it handy, perhaps post or e-mail the matrix? Thank you!
|
|
|
|
Joined: May 2009
Posts: 1,198
Member
|
Member
Joined: May 2009
Posts: 1,198 |
The power requirements (in amps at 24 VDC) for each card are as follows:
DKSC-8 .64 DKSC-16 1.28 SLC-8 .75 SLC-16 .40 T1C .40 T1/E1/PRI .20 LSC or LGC .15 LSC-D or LGC-D .30 OPC .30 IPRC .34 IPRC-D .48
The CPC and EVMC are not specified, but the manual refers to 6 amps at 5VDC, so I’ve used that number.
|
|
|
|
Joined: Jul 2011
Posts: 3
Member
|
OP
Member
Joined: Jul 2011
Posts: 3 |
Thank you. This is very helpful!
|
|
|
Forums84
Topics93,964
Posts637,402
Members49,703
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
99
guests, and
31
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|