|
|
Joined: Mar 2001
Posts: 22
Member
|
OP
Member
Joined: Mar 2001
Posts: 22 |
How do I get coverage for the attendent (QCC), to a ATL set? The ATL set will be a Trans Talk 9000,working out of 408GS/LS ATL board. This Legend also has mail, 007MLM board. Thanks for any helpyou might give!! xtalk The Trans Talk will cover for attendent.Also when ATTN. pos-busyn is on calls go to AUTO-ATTN.
[This message has been edited by xtalk (edited 08-08-2001).]
[This message has been edited by xtalk (edited 08-13-2001).]
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Do you want the ATTN. to cover the Trans Talk or do you want the Trans Talk to cover for the ATTN. ?
Russ runs a local service and private tech center. [/url]
|
|
|
|
Joined: Aug 2001
Posts: 4
Member
|
Member
Joined: Aug 2001
Posts: 4 |
The system gets a little tricky and difficult (flexibility-wise) when an operator is designated as a QCC. The only time that a call will overflow from the QCC is when it is in position busy - which is how you currently have the AutoAttendant set up. If the QCC doesn't go into pos-busy then all calls are just going to sit in queue there. Here's my suggestion: Make a new calling with the transtalk as the only member. Put that transtalk in a coverage group and apply that coverage group to the QCC operator. Replace the vm calling group against the QCC operator with the new calling group that you just made. Use night service to trigger the auto-attendant. If you have the MLM set up to follow the system mode - change it to follow the business schedule and modify the business schedule to match your office hours. This way the day and night greetings will play at the proper times, regardless of whether the system is in day or night mode.
Functionality: When the QCC is in position busy all calls will queue to the calling group which has the transtalk as the only member. You can even set up this calling group to overflow to the auto attendant should callers wait too long. Calls that ring directly to the transtalk's extension (not calls to the calling group) will queue to the QCC if not answered. When the system is in night mode calls will ring to the auto-attendant and the business schedule in the vm will determine whether the day or night greeting plays. That's about the best I think you're going to do with being setup as a QCC. If you changed the operator position to a DLC you'de have some more flexibility.
Hope this helps.
|
|
|
Forums84
Topics94,262
Posts638,696
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Curlycord),
120
guests, and
246
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|