sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Cordless phones on Partner

Working with an older Partner System. Added two cordless phones, and can not get them to accept programming for prime Intercom instead of Line Group when they go off hook. Any thoughts or recommendations would be appreciated.

What partner system are you working with. Partner Plus, Partner II, ACS, Endeavor?

[This message has been edited by dtmf (edited January 31, 2002).]

I'm working with a Partner II.

You must program automatic line selection to go to intercom instead of line/pool.

Go to centralized programming from 10 or 11 enter the extention number of the extention the cordless is on, then dial ** then press the 2 intercom buttons then dial ** again

Don

PhoneGuy
Feature 00 (system) (system) (central tel) enter ext # then ** left intercom and right intercom ** then get out of programming or go to next station.
Hope this helps

[This message has been edited by dtmf (edited January 31, 2002).]

We did but we kept getting an error tone.

ttech -

Thanks we will try that.

Actually, from Ext. 10 or 11, Feature 00, Left Intercom Twice, Right Intercom Once, dial the Extension Number of the Cordless Phone, dial **, press the Left Intercom, now press the line keys in the order that you want the phone to select them, then dial **, Feature 00.

The part about pressing the line keys is important, otherwise it won't be able to dial 9 for an outside line.

what Model Partner Cordless phones the 9031 this is done at the set I believe