|
Joined: Apr 2002
Posts: 4
Member
|
OP
Member
Joined: Apr 2002
Posts: 4 |
We have a 4-line/12-extension PARTNER system composed of R3.1 and R4.0 Modules in a 5-slot Carrier + 8 MLS-12D phones. We want to upgrade to PARTNER ACS to add lines/extensions and to overcome the 4-line limitation on the telephones. I would like to know...
1. Can we use our existing 5-slot carrier with PARTNER ACS modules?
2. Can we use our MLS-12D telephones with PARTNER ACS modules?
3. Can we use any of our existing modules with PARTNER ACS modules?
Thanks in advance!
|
|
|
|
Joined: Mar 2001
Posts: 320
Member
|
Member
Joined: Mar 2001
Posts: 320 |
|
|
|
|
Joined: Dec 2001
Posts: 99
Member
|
Member
Joined: Dec 2001
Posts: 99 |
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
You will have to break the tabs off to put the ACS moduals in. And also the older moduals may or may-not support Caller ID depending on what they are. But all will work.
[This message has been edited by dtmf (edited April 14, 2002).]
Russ runs a local service and private tech center. [/url]
|
|
|
|
Joined: Apr 2002
Posts: 4
Member
|
OP
Member
Joined: Apr 2002
Posts: 4 |
Thanks for the helpful responses!
I went ahead and ordered an ACS Control Module, a 308 card and 4 PARTNER 18D phones to start the initial expansion. I have another question but I'll start a new topic for that. Look for "Automatic Ringdown on PARTNER ACS"
|
|
|
Forums84
Topics94,314
Posts638,918
Members49,773
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
146
guests, and
52
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|