sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Partner Page Pac

I upgraded a customer from a Partner to a Magixs system. They have a Partner Page Pac, looks like a 206 module attached outside the carrier that connects to the page port. Dial intercom 70, beep, dial 1. Paging works great.
Connected to the Magixs on a loop-start line nothing. Connected to a T/R station, dial station, beep, dial 1, Paging works with very, very low volume.
Ideas?

Did you name the CO as a page port?

Yes. Tried it both ways. No change, nothing on a CO port. Low volume on a station port.

[This message has been edited by gkar (edited October 05, 2002).]

this unit was designed to work only with the partner systems.it will not function correctely with the legend or Magix system.

Good Luck.

Gil,

I have access to some very nice amps starting at about $100 and up. They do 25v,70v, and 8 ohm. Maybe others. They use t/r inputs.

Thanks guys. I'll see what the customer wants to do. I found a Page Pac Plus that I may just trade out and hold the Partner unit for the future.