|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
OP
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
I have a customer with two Magix systems connected via a point to point T-1 setup as PRI. The network switch is using the PBX switch for local dialtone accross a PRI. When someone from the PBX switch dials out on the PRI, it displays the base number plus extension like it is supposed to do. If someone dials out from the network switch, it shows up as unknown. It does not even send just the base number. I have tried changing every setting I can possibly think of, but still the same results. Switch numbers are correct.
any one have any ideas?
|
|
|
|
|
Joined: Feb 2003
Posts: 353
Member
|
|
Member
Joined: Feb 2003
Posts: 353 |
z-man, i think you will find that the legend/magix cannot pass cpn information from one pri to another pri.
HE SEEMS TO BE SAYING SOME KIND OF WORDS
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
OP
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
it should at least send the base number when coming from the second system. It does on others, that is why this is so frustrating.
|
|
|
|
|
Joined: Apr 2002
Posts: 646
Member
|
|
Member
Joined: Apr 2002
Posts: 646 |
I ran into this last year and went to tier4. No can do. Sorry.
|
|
|
|
Forums84
Topics93,879
Posts637,001
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
85
guests, and
13
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
