|
|
|
|
Joined: Apr 2004
Posts: 33
Member
|
OP
Member
Joined: Apr 2004
Posts: 33 |
Does anyone know how to install a fractional T1 into the Avaya Partner ACS R-6 or how that is accomplished? Is there a special t1 card needed?
Would this connection be at a digital or analog point? ......tks...
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
You need the T1 Module,it has an internal CSU, and you will also need the R6.0PC Administration software to configure it. If you are going to use the others for data then you will need a DSU/CSU for that end of it.
[This message has been edited by dtmf (edited July 06, 2004).]
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: Apr 2004
Posts: 33
Member
|
|
OP
Member
Joined: Apr 2004
Posts: 33 |
Tks...........for your help....
|
|
|
|
Forums84
Topics94,297
Posts638,867
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
117
guests, and
346
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
