|
Joined: Sep 2003
Posts: 100
Member
|
OP
Member
Joined: Sep 2003
Posts: 100 |
I need to know how to adjust the volume on a Merlin Plus 820. The volume on the system's moh port needs to be louder.
|
|
|
|
Joined: Oct 2001
Posts: 4,043
Member
|
Member
Joined: Oct 2001
Posts: 4,043 |
1st off, keep in mind that system uses an 8 ohm input unlike the standard or usual 600 ohm input that most systems use. Did you try adjusting the output of the sorce? Go to the administrator/ attendant voice terminal and slide the T/P switch to P and press administer. *12 is off * 13 is low * 14 is medium and *15 is high. then press administer again, it should beep twice. Slide the T/P switch to the center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/forum/biggrin.gif)
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
You can also use it as Background music buy using the steps above with the codes, *16 = off, *17 = Low, *18 = Med. *19 = high
|
|
|
Forums84
Topics93,884
Posts637,026
Members49,675
|
Most Online5,661 May 23rd, 2018
|
|
|
|