|
|
|
|
Joined: Mar 2005
Posts: 10
Member
|
OP
Member
Joined: Mar 2005
Posts: 10 |
I am rather new to the Definity and I am trying to get a coverage path to go over a PRI trunk group to another switch. It needs to pass certain called party information and route to a station on the other switch. I am not sure if coverage is the best practice for this type of application.
Any ideas?
|
|
|
Avaya IP Office Service in Canada
Atcom provides quick and affordable service for your Avaya IP Office business phone system!
Our expert technicians have years of experience installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2002
Posts: 646
Member
|
|
Member
Joined: Apr 2002
Posts: 646 |
It will not pass outside caller ID using coverage. You have to use a VDN with a route to Vector step or UDP routing.
|
|
|
|
|
Joined: Mar 2005
Posts: 10
Member
|
|
OP
Member
Joined: Mar 2005
Posts: 10 |
Thank you very much, that was very helpful.
What I am actually trying to do is get "called" party info. For example, I have a PRI connecting the Definity to another switch. An outside caller calls a DID that rings into the Definity. That call needs to be sent over the PRI to a specific station on the other switch.
Here is my set up:
Trunk group 8 is my PRI connecting the switches. 3200 is the station on the other end. And 555-1212 is the DID.
Is this possible? Or am I completely off my rocker?
|
|
|
|
|
Joined: Apr 2002
Posts: 646
Member
|
|
Member
Joined: Apr 2002
Posts: 646 |
In your trunk group you need to check send calling number and then set up your ISDN Public-Unknown-Numbering table.
|
|
|
|
|
Joined: Mar 2005
Posts: 10
Member
|
|
OP
Member
Joined: Mar 2005
Posts: 10 |
|
|
|
|
Forums84
Topics93,967
Posts637,413
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
140
guests, and
32
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
