sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Call coverage to PRI

I am rather new to the Definity and I am trying to get a coverage path to go over a PRI trunk group to another switch. It needs to pass certain called party information and route to a station on the other switch. I am not sure if coverage is the best practice for this type of application.

Any ideas?

It will not pass outside caller ID using coverage. You have to use a VDN with a route to Vector step or UDP routing.

Thank you very much, that was very helpful.

What I am actually trying to do is get "called" party info. For example, I have a PRI connecting the Definity to another switch. An outside caller calls a DID that rings into the Definity. That call needs to be sent over the PRI to a specific station on the other switch.

Here is my set up:
Trunk group 8 is my PRI connecting the switches. 3200 is the station on the other end. And 555-1212 is the DID.

Is this possible? Or am I completely off my rocker?

In your trunk group you need to check send calling number and then set up your ISDN Public-Unknown-Numbering table.

Beautiful! Thanks