sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Where is paging in a Definity?

There is a question about which access codes cover which areas for our paging system at one of our facilities. The site is 90 minutes away so I don't really want to drive down there with out knowing what I'm doing.
I can't seem to figure out how the paging works. The people there dial a 60 or 61,62… to page. But they don't seem to know where they are paging, so they just try them all. I've tried to find the access codes in the Definity g3si v9 but haven't found them where I thought they should be. The only thing I found was in the dial plan where it shows a 2 digit dial string beginning with a 6 is a "dac". I tried "change feature-access-codes", "change system-parameter features", "list station", "list extension", and "list intercom-group". One of our other locations has an extension set up for paging.

Any thoughts where I should try?

Thank you.



------------------
J L Williams
Selftaught tech in NE

Paging can be set up to an AUX trunk card like a TN763. Command is change paging loudspeaker. In the dialplan there should be a code for paging.

Thank you. I don't know how I missed the ch paging loud command. I had found the dac it in the dial plan. It was not set up for all so that's why they had to page zones seperately.

------------------
J L Williams
Selftaught tech in NE