|
Joined: Aug 2004
Posts: 7
Member
|
OP
Member
Joined: Aug 2004
Posts: 7 |
I am putting a four port Partner VS module into a ACS cabinet. I only have a 400e card in slot one far left. I intend to put the VS module to the right of that. The 308 ACS Processor is of course in the middle. There are no 206 or 308 expansion modules. What are the correct Hunt group assignments for the four port VS?
Thanks for your help
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
Member
Joined: Apr 2004
Posts: 4,991 |
Your second slot is good use 26-29 if its a vs mail
|
|
|
|
Joined: Feb 2005
Posts: 12,344 Likes: 3
Member
|
Member
Joined: Feb 2005
Posts: 12,344 Likes: 3 |
Assume that the 400E is a 406E. It would provide extensions 18-23 if it had any. Your Mail VS also looks like a 206E to the system.
On the Mail VS's, ports are assigned backwards or from the last to the first. So, ACS is 10-17, 400E is 18-23 and Mail VS is 24-29. Counting back from 29 you would assign extensions 29, 28, 27 and 26. to 505,7.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Don't forget about 206,506,507
Russ runs a local service and private tech center. [/url]
|
|
|
Forums84
Topics94,299
Posts638,872
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
101
guests, and
313
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|