sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems strange dial out problem ACS 3

On extension 11, when I press the SPKR button, it goes straight to Line 1, which is what it should do. No need to press 9.

On extension 10, when I press the SPKR button, it goes straight to Intercom , then when pressing 9, it goes to Line 1. How do I get it go to Line 1 instead of going to Intercom?

Thanks!

Partner documentation is available for download on the Avaya site. If you want to be involved with the administration of Partner systems you should familiarize yourself with it. What you want to do (Automatic Line Selection) is a basic procedure.

From extension 10 or 11- Central Telephone Programming:

(Feature)(0)(0).
Left intercom twice.
Right intercom once.
Enter the extension number.
The buttons will now reflect the buttons on the extension you entered.
Dial (*)(*)
Press the line buttons in the order you want them to be selected when you lift the handset, finish with the two intercom buttons.
Dial (*)(*) again and press the right intercom button to do another extension or simply lift the handset and replace it to get out of programming mode.

-Hal

your awesome!!

Thank you!

Eddie