|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
I have a Partner II with a R4.1 Processor. I am adding a 2nd cabinet with a R3.1 Expansion Processor. When I power up the system & the Expansion does not light green. If I disconnect the connector cable & power up, the Expansion does go green. Will an R3.1 ExProc work w/ an R4.1 Main Proc? Thanks.
|
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
I'm pretty sure your ok with those revisions.
I dont think they made an exp cab higher then 3.1.
The book i have shows them compatible.
I think you need to turn on the exp first and then the main cabinet ,or the reverse to get them to work together.
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
|
|
|
|
|
Joined: Feb 2005
Posts: 12,358 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 12,358 Likes: 4 |
Try powering up the expansion first then the main cabinet. If that doesn't work you probably have a bad cable or expansion.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
Forums84
Topics94,538
Posts640,052
Members49,854
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
130
guests, and
18
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
