|
|
|
|
Joined: Jan 2006
Posts: 72
Member
|
|
Member
Joined: Jan 2006
Posts: 72 |
I'm not familiar w/ Avaya...
I think its a 87 Media Server.
All tails are cut down on patch panel and my feeds are cut down on patch panel.
My guys are making patch cords (6 conductor silver satin) to use for connecting to the feeds. Should they make them str8 through or crossover?
Regular line cords are cross-over. I'm thinking the patch cords should be str8. Thanks.
-dan
|
|
|
|
|
Joined: May 2002
Posts: 17,758 Likes: 39
Member
|
|
Member
Joined: May 2002
Posts: 17,758 Likes: 39 |
Regular line cords aren't crossover, they just reverse tip and ring. Either way should work fine. This assumes you're talking about a TDM phone system.
Retired phone dude
|
|
|
|
|
Joined: Jan 2006
Posts: 72
Member
|
|
Member
Joined: Jan 2006
Posts: 72 |
right reverse t&r. so we should be ok w/ using cords with the t&r reversed @ the patch panel. they are TDM phones. phones are not polarity sensitive?
Thanks
-dan
|
|
|
|
|
Joined: May 2002
Posts: 17,758 Likes: 39
Member
|
|
Member
Joined: May 2002
Posts: 17,758 Likes: 39 |
You should be fine. Straight through should work fine also. You'll fine line cords made both ways now days. The reversal was for when phones were polarity sensitive. Some 4 wire systems still require proper polarity on the data pair, but I haven't seen that as an issue on Avaya products. If I'm wrong I'm sure one of our Avaya gurus will be along to correct me.
Retired phone dude
|
|
|
|
|
Joined: Feb 2005
Posts: 12,360 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 12,360 Likes: 4 |
Why are you making cords? That's what patch cords are for. If the reason is you are worried about polarity you need to understand telcom a bit better.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Jan 2006
Posts: 72
Member
|
|
Member
Joined: Jan 2006
Posts: 72 |
We make the cords to the length needed. Makes for a neat looking data rack. No trying to hide xtra unneeded slack.
I've worked on systems that require pairs 4 and 5 to be straight through and not reversed.
-dan
|
|
|
|
|
Joined: Apr 2005
Posts: 1,138
Member
|
|
Member
Joined: Apr 2005
Posts: 1,138 |
I am going to assume that we are talking about digital or analog phones, as my answer won't apply to IP phones.
Either way will work. The communiction manger does not care if the cord is straight or crossed.
|
|
|
|
Forums84
Topics94,579
Posts640,265
Members49,878
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
381
guests, and
73
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image from phototiki.com]](http://www.phototiki.com/images/user/sack/2009/05/cb70c1b7199119be2a64411aeaf58325ac0729d4.jpg)