|
|
|
|
Joined: Jun 2007
Posts: 36
Member
|
|
Member
Joined: Jun 2007
Posts: 36 |
I have a customer with an older Avaya which has 2 5-card carriers with a cable connecting the processors. All of the station modules are 206E ver 4.1. They recently had a nearby lightning strike and I replaced the processor in the expansion module. The processor on the main carrier has no slots for PCMCIA cards or any place to install batteries I think it is a ver 3.1. When I power down the unit I lose all programming, I am doing a #728 to save programming but it is still all lost. Is there a problem with this processor or am I missing something to save the programming?
|
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
Theres a battery in your processor in cabinet 1
thats probably dead.
Its a solder in ,so you may want to consider a battery back up on system and /or replace the processor with a refurb with a good battery.
|
|
|
|
|
Joined: Jun 2007
Posts: 36
Member
|
|
Member
Joined: Jun 2007
Posts: 36 |
Do you know the voltage and dimensions of the internal battery?
|
|
|
|
|
Joined: Oct 2004
Posts: 812
Member
|
|
Member
Joined: Oct 2004
Posts: 812 |
3.6V
there are three 1.2v lithium type disc cells that make up 3.6v
Snip the old battery off carefully and soder to the old posts. It's Much faster that way.
|
|
|
|
|
Joined: Jun 2001
Posts: 10,949
Moderator-Avaya
|
|
Moderator-Avaya
Joined: Jun 2001
Posts: 10,949 |
I got to concur with Ken.............sounds like it's time to upgrade the processor.
Avaya SMB Authorized Business Partner. ACIS/APSS ESI Certified Reseller/Installer www.regal-comm.com
|
|
|
|
Forums84
Topics94,563
Posts640,162
Members49,867
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (LarryH2),
27
guests, and
72
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
