|
|
Joined: Apr 2004
Posts: 207
Chris Howard
|
|
Chris Howard
Joined: Apr 2004
Posts: 207 |
William C. Howard
|
|
|
|
|
Joined: Nov 2007
Posts: 19
Member
|
|
Member
Joined: Nov 2007
Posts: 19 |
Thanks for all of your help, I'm going to hook it up next week, I'll let you know if I have problems, again thanks
|
|
|
|
|
Joined: Nov 2007
Posts: 19
Member
|
|
Member
Joined: Nov 2007
Posts: 19 |
When I try to go into the Networking administration menue I get a error that reads"networking module is not running". I've tried to reboot the Intuity to get in running bad I've had no luck, any suggestion. Thanks
|
|
|
|
|
Joined: Apr 2005
Posts: 1,138
Member
|
|
Member
Joined: Apr 2005
Posts: 1,138 |
Do you have the proper board with the NIC in the Intuity? You should see 2 RJ45's on the rear. One board with both DB9, RJ11, and RJ45. That's not it. You need a board with only a single RJ45.
|
|
|
|
|
Joined: Apr 2004
Posts: 207
Chris Howard
|
|
Chris Howard
Joined: Apr 2004
Posts: 207 |
He has the correct 8416 Lan card for the software load he is runing, 4.4.5. The problem is in the software on the hard drive and not the lan card. Liquidvw is talking about a PRO100 lan card with a single RJ45 that only workd in the 5.? loads.
William C. Howard
|
|
|
|
|
Joined: Aug 2007
Posts: 289
Member
|
|
Member
Joined: Aug 2007
Posts: 289 |
Mike1122 do you have this? https://support.avaya.com/elmodocs2/intuity/audix/LX_r2/lx_r2_i1/index.htm This is the complete documentation (admin and maintenance) for your 2.0 Intuity.
Mike Jones
"A people that values its privileges above its principles soon loses both."
- Dwight D. Eisenhower (1890-1969), Inaugural Address, January 20, 1953
|
|
|
|
Forums84
Topics94,515
Posts639,961
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
188
guests, and
49
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from phototiki.com]](http://www.phototiki.com/images/user/sack/2009/05/cb70c1b7199119be2a64411aeaf58325ac0729d4.jpg)
