|
|
|
|
Joined: Mar 2007
Posts: 32
Member
|
|
Member
Joined: Mar 2007
Posts: 32 |
I have a customer with an old Merlin Plus that had an indoor Bell that rang in the shop when a phone call came in. When I plug the bell into an extension port it rings and will stop shortly then ring again and continues to do this. How can I get this to work with a Partner ACS R7. Thanks
|
|
|
|
|
Joined: Feb 2005
Posts: 12,358 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 12,358 Likes: 4 |
You will need to replace it with something that will work with the Partner systems. Most electronic ringers will work with the Partner's reduced ring voltage.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Mar 2007
Posts: 32
Member
|
|
Member
Joined: Mar 2007
Posts: 32 |
The bell rings when I plug it into an extension port but I cannot turn it off or get it to control the ringer. Are you saying the low voltage will cause this? Thanks
|
|
|
|
|
Joined: Jan 2004
Posts: 515
RIP Moderator
|
|
RIP Moderator
Joined: Jan 2004
Posts: 515 |
On a Merlin Plus, the bell worked with DC Voltage.
As Hal said, you need something else for a Partner.
That is, something that responds to RINGING Voltage.
RULE NUMBER 2, "THINKIN' WON'T GET IT, YOU GOTTA KNOW!" RULE NUMBER 3, if you need TIER-3 SUPPORT on a LEGEND or MAGIX, go to http://home.comcast.net/~merlinman -
|
|
|
|
|
Joined: Mar 2007
Posts: 32
Member
|
|
Member
Joined: Mar 2007
Posts: 32 |
Does any of you know what external ringer will work with the Partner ACS R7? Thanks.
|
|
|
|
Forums84
Topics94,545
Posts640,084
Members49,857
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (juno, Toner),
250
guests, and
24
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
