|
|
Joined: Feb 2005
Posts: 49
Member
|
|
Member
Joined: Feb 2005
Posts: 49 |
Is there a way to completely default a Merlin Messaging Release 1.1.9?
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
You bet there is, small cost involved though.
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: Jan 2004
Posts: 515
RIP Moderator
|
|
RIP Moderator
Joined: Jan 2004
Posts: 515 |
Russ is RIGHT ON with that info.
RULE NUMBER 2, "THINKIN' WON'T GET IT, YOU GOTTA KNOW!" RULE NUMBER 3, if you need TIER-3 SUPPORT on a LEGEND or MAGIX, go to http://home.comcast.net/~merlinman -
|
|
|
|
|
Joined: Dec 2004
Posts: 236
Member
|
|
Member
Joined: Dec 2004
Posts: 236 |
I would also add that defaulting should always be done for any new install of new, refurbished, or used equipment prior to any programming. Failure to do so will come back to bite you in many cases. This is true for almost all phone, or voicemail systems, simply re-recording is not advised, and even new systems are not in a defaulted state in all cases.
I can not recommend any technology platform, only technicians!
|
|
|
|
|
Joined: Feb 2005
Posts: 49
Member
|
|
Member
Joined: Feb 2005
Posts: 49 |
Thanks for responding, but I finally tried XXXXXX successfully.
Rick
[Please don't post any passwords or defaulting codes in open forums]
|
|
|
|
Forums84
Topics94,565
Posts640,181
Members49,871
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
123
guests, and
265
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
