sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Magix PRI Programming

I have recently upgraded a Legend 3.0 to a Magix CKE5 7.0 with a PRI. I have the PRI programmed and temporarily set the PRI lines to pool 890, but I cannot get an outside line through the pool, nor do any of the DID's call in. I don't know if I am missing something, but I have set up other PRI's using the same settings as I am currently using. Below is the PRI print. Thank you in advance for any assistance that you can provide


A DS1 SLOT ATTRIBUTES

A Slot Type Format Supp Signal LineComp
A 9 PRI ESF B8ZS DMI-MOS 1
A PRI INFORMATION


A Slot 9 Switch: 5ESS

A System: By line

A BchnlGrp #: Slot: TestTelNum: NtwkServ: Incoming Routing:
A 1 9 CallbyCall By Dial Plan

A Channel ID: 23 22 21 20 19 18 17 16 15 14
A 13 12 11 10 9 8 7 6 5 4
A 3 2 1

A Line PhoneNumber NumberToSend
A 821
A 822
A 823
A 824
A 825
A 826
A 827
A 828
A 829
A 830
A 831
A 832
A 833
A 834
A 835
A 836
A 837
A 838
A 839
A 840
A 841
A 842
A 843

A Network Selection Table

A Entry Number: 0 1 2 3
A Pattern to Match: 101**** 10***

A Special Service Table

A Entry Number: 0 1 2 3 4 5 6 7
A Pattern to Match: 011 010 01 00 0 1
A Operator: none OP OP OP/P OP none none none
A Type of Number: I I I N N N N N
A Digits to Delete: 3 3 2 2 1 1 0 0

A Call-By-Call Service Table

A Entry Number: 0 1 2 3 4
A Pattern 0: 0
A Pattern 1: 1 1
A PRI INFORMATION


A Pattern 2: 2 2
A Pattern 3: 3 3
A Pattern 4: 4 4
A Pattern 5: 5
A Pattern 6: 6
A Pattern 7: 7
A Pattern 8: 8
A Pattern 9: 9
A Call Type: BOTH BOTH BOTH BOTH BOTH
A NtwkServ: No Service
A DeleteDigits: 0 0 0 0 0

A Entry Number: 5 6 7 8 9
A Call Type: BOTH BOTH BOTH BOTH BOTH
A NtwkServ:
A DeleteDigits: 0 0 0 0 0

A Dial Plan Routing Table

A Entry Number: 0 1 2 3
A NtwkServ: Any service Any service Any service Any service
A Expected Digits: 4 4 4 4
A Pattern to Match: 8118 0141 4800
A Digits to Delete: 4 1 4 4
A Digits to Add: 100 771 103

A Entry Number: 4 5 6 7
A NtwkServ: Any service Any service Any service Any service
A Expected Digits: 4 4 4 4
A Pattern to Match: 4801 0013 4803 4804
A Digits to Delete: 4 4 4 4
A Digits to Add: 125 203 101 108

A Entry Number: 8 9 10 11
A NtwkServ: Any service Any service Any service Any service
A Expected Digits: 4 4 4 4
A Pattern to Match: 4805 4806 4807 4808
A Digits to Delete: 4 4 4 4
A Digits to Add: 121 102 127 129

A Entry Number: 12 13 14 15
A NtwkServ: Any service Any service Any service Any service
A Expected Digits: 4 4 4 4
A Pattern to Match: 4809 4810 4811 4802
A Digits to Delete: 4 4 4 4
A Digits to Add: 105 120 131

Dialing Plan Routing:
What is the Digits to Delete 1, and Digits to Add 771(141771)?
In Patern 3 you are expecting 4 and you deleting 4 but no Number and nothing to Add.

CBC:
has to be 0=0, 1=1, etc. not 1 1,2 2,3 3

BChanGr #1 has to be :0901 - 0923
Lines can include Line 844 as well.

Outgoing Routing has to be Pool 890 as a first choice.
After you set everything up go to System, Logs. Permenent and Trancient and delete all of them, then go to Maint. and do reset and Restore for slot 9. If you need give me a call:201-664-3141