Paging on a G450/S8300

Print Thread

Rate Thread

Paging on a G450/S8300 #91436 09/28/08 08:16 AM
Joined: Dec 2007 Posts: 175 Maryland blklabs Member
blklabs Member Joined: Dec 2007 Posts: 175 Maryland	When the customer's page lasts longer than 10 seconds, the volume level seems to jump. The zones experience an increase in volume, some to the point of distortion. The customer actually hooked up a db meter via a banjo and sees a bump of about 25 db after the first 10 seconds. Initial testing points to the analog port on the MM711. Any ideas?

Avaya IP Office Help & Support Website

Avaya IP Office Help & Support Website

FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Re: Paging on a G450/S8300 #91437 09/29/08 08:35 AM
Joined: Apr 2005 Posts: 1,138 NJ, USA, Earth. liquidvw Member
liquidvw Member Joined: Apr 2005 Posts: 1,138 NJ, USA, Earth.	What version of CM and what patches are applied. What FW is on the analog board?

Re: Paging on a G450/S8300 #91438 10/02/08 05:13 AM
Joined: Dec 2007 Posts: 175 Maryland blklabs Member
blklabs Member Joined: Dec 2007 Posts: 175 Maryland	R015x.00.0.825.4 patch 00.0.825.4-15467 FW 089

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Paging on a G450/S8300