|
Joined: Jan 2010
Posts: 3
Member
|
OP
Member
Joined: Jan 2010
Posts: 3 |
I have a dss light for ext. 25 appear on all the phones on the system. The phone is not plugged in at all, and the dss for ext 25 fast blinks on all other ext. I am at a loss for what to do.
|
|
|
|
Joined: Dec 2007
Posts: 908
Member
|
Member
Joined: Dec 2007
Posts: 908 |
I don't know but check the users guide, plug a station into that port maybe it's in DND.
|
|
|
|
Joined: Feb 2005
Posts: 12,344 Likes: 3
Member
|
Member
Joined: Feb 2005
Posts: 12,344 Likes: 3 |
Madam Zora and her crystal ball are still out today so how about telling us WHAT system you are talking about!
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
Joined: Jan 2010
Posts: 3
Member
|
OP
Member
Joined: Jan 2010
Posts: 3 |
Partner ACS, not sure of the release. The phone is not in dnd, I have plugged it in and checked
|
|
|
|
Joined: Feb 2005
Posts: 12,344 Likes: 3
Member
|
Member
Joined: Feb 2005
Posts: 12,344 Likes: 3 |
Might it be an R8 and you have a Message Alert Notification button on the phone(s) and it's activated?
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
Joined: Nov 2005
Posts: 828
Member
|
Member
Joined: Nov 2005
Posts: 828 |
Or that extension is set as fax and a call was transferred and it didn't answer - system it telling you thus.
|
|
|
|
Joined: Jul 2001
Posts: 3,345 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,345 Likes: 10 |
Ext. 25 is set as a FAX extension, has had a call ring at it which was not answered, and the light is telling you to go change the paper on the Fax extension.
|
|
|
|
Joined: Jun 2001
Posts: 10,949
Moderator-Avaya
|
Moderator-Avaya
Joined: Jun 2001
Posts: 10,949 |
Yep, been down that road more than once TTT.
Avaya SMB Authorized Business Partner. ACIS/APSS ESI Certified Reseller/Installer www.regal-comm.com
|
|
|
|
Joined: Jan 2010
Posts: 3
Member
|
OP
Member
Joined: Jan 2010
Posts: 3 |
Thanks, it is not R8 system is 10-12 yrs. old. Verified that it is not the fax ext. there is no fax ext. programmed. I did checked to see if there was a wake up set for that ext, there was none, but I did clear the wake up anyways. I will try to get onsite this morning to get the release and any other info that I can.
Bryan
|
|
|
|
Joined: Feb 2005
Posts: 12,344 Likes: 3
Member
|
Member
Joined: Feb 2005
Posts: 12,344 Likes: 3 |
No, it wouldn't be wake up. The only things that can make a DSS button flash is Message Alert and Fax Extension. At this point I would do a system reset and see if that clears it. I did run into a situation once with an old ACS where even after a reset the programming showed a feature as not being active yet it still was. Defaulting and re-programming from scratch was the only way to take care of it.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
Forums84
Topics94,306
Posts638,894
Members49,771
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Professor Shadow),
58
guests, and
29
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|