Definity G3 - How to allow 511 calls?

Print Thread

Rate Thread

Definity G3 - How to allow 511 calls? #96439 02/26/10 11:35 AM
Joined: Mar 2007 Posts: 10 Flagstaff, AZ Ellitro Member
Ellitro Member Joined: Mar 2007 Posts: 10 Flagstaff, AZ	Hello, How do I allow 511 calls in a Definity G3? I'm somewhat familiar with ARS changes, I tried adding a line for 511 but I think I screwed up on the min/max and node. Still learning, Thanks Ellitro

Avaya IP Office Help & Support Website

Avaya IP Office Help & Support Website

FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Re: Definity G3 - How to allow 511 calls? #96440 02/27/10 11:37 PM
Joined: Sep 2005 Posts: 898 Rogers, MN USA Wellco RIP Moderator-General
Wellco RIP Moderator-General Joined: Sep 2005 Posts: 898 Rogers, MN USA	Should be pretty straight forward "ch ars ana 5" put in 511 on a line min 3 max 3 choose your route pattern, type will probably be "serv" and you should be good to go. Not sure about the node business?, not something you need. Just compare it to your 411 and you should be ok! Bob Wells WellComm, Inc. "As long as nobody's dead or in jail, it can't be all that bad ! "

Re: Definity G3 - How to allow 511 calls? #96441 03/01/10 02:37 AM
Joined: Mar 2007 Posts: 10 Flagstaff, AZ Ellitro Member
Ellitro Member Joined: Mar 2007 Posts: 10 Flagstaff, AZ	Thanks, that was it.

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Definity G3 - How to allow 511 calls?