sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Merlin Legend SA Question

Is there anyway to move one on the SA Ring or Voice buttons? I like the way the older Merlin phone were set-up. Intercom is the first button and the second is Line one, but now for the legend it's SA Ring, then SA Voice and the Third Button in Line 1. I want to move the second button (SA Voice) to the right of SA Ring. Is this possible? I was thinking about WinSPM software but I didn't know if i needed it and plus my laptop doesn't have a 56k modem. Thanks
- Blake

Yes, through Centralized Telephone Programming, you can add an additional System Access (ring) to button 6, then change it to Voice, then delete the SA on button 2. Now you have to delete Line 1, and then reassign it, which will automatically put it on "the first available position", which is button 2.

WinSPM communicates at a blazing 1200 baud

You can also do it from the programming console

Well I have a Programming Console, I'm going to see if I can do what you just posted. I can't use WinSPM yet. If i program the console phone will all the other phone change too (atl/mlx phones)? Thanks
-Blake

You will have to do each phone one at a time. Copy function might work here too.

Thanks Guys for your help, I got WinSPM to work and I'm playing around with it. Wow Touch Tone Tommy, you were not lying about the blazing 1200 Baud. It's so slow. I was stocked that it let me program the old Merlins(my favorite phone). Thanks again
-Blake