|
|
|
|
Joined: Apr 2009
Posts: 447
Member
|
|
Member
Joined: Apr 2009
Posts: 447 |
Hi guys.
Have a 2x6 card that will power up then go down 30 sec. later. Can place a 3x8 card in the same slot ok. Put 2x6 in other slots same result. If i remove the 2x6 and power it up alone it stays on. Switched the 2x6 and 3x8 in other slots 3x8 0k but the 2x6 will go down.
Thanks Gary s
Gary Stevens
|
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
Sounds like a bad 206 ,but what else is in the cabinet left to right.
If the 206 is the old 206 that was a 2 x6 control
unit i'm not sure if it will work as 2 x 6 expansion card.
|
|
|
|
|
Joined: Mar 2010
Posts: 33
Member
|
|
Member
Joined: Mar 2010
Posts: 33 |
is this a 206 standalone or 206E? re-seat all your cards including your processor. Also what is the processor you are using? Do you have an ACS installed in there since you can a 3X8 card ??
|
|
|
|
Forums84
Topics94,509
Posts639,920
Members49,843
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
