|
|
|
|
Joined: Aug 2005
Posts: 631
Member
|
|
Member
Joined: Aug 2005
Posts: 631 |
I was attempting an upgrade of a Legend R7 to Magix 4 R7 today. Used WinSPM 9, downloaded the programming, converted it, swapped CPUs and then had a problem. The Magix did a frigid start and was defaulted at this point. With the Magix CPU installed WinSPM reported an unknown card in slot 4. Slots 1-3 are 408 GS/LS/MLX cards and slot 4 is a 400 GS/LS/TTR and slot 5 is a MLM 007 R1. So I pulled the 400 card in slot 4, moved the MLM into that slot. Same problem in WinSPM. In fact even when I yanked all cards but the first 408 in slot 1 it still reported an unknown card in slot 4 even though the inventory showed it empty. What could be causing this? A board renumber(s) did nothing to help.
|
|
|
|
|
Joined: Jan 2004
Posts: 515
RIP Moderator
|
|
RIP Moderator
Joined: Jan 2004
Posts: 515 |
RULE NUMBER 2, "THINKIN' WON'T GET IT, YOU GOTTA KNOW!" RULE NUMBER 3, if you need TIER-3 SUPPORT on a LEGEND or MAGIX, go to http://home.comcast.net/~merlinman -
|
|
|
|
Forums84
Topics94,552
Posts640,112
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, ChrisRR),
30
guests, and
83
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
