I have a customer that is adding a seimens hipath
pbx to a section of his business. I need to be able to take 2 incoming did numbers and the local extension and route them to this seimens switch via isdn pri. I have no problem getting the pri to work between the 2 switches, i am just not sure how to start my dial plan. as i said at this point it is only 2 numbers although i would imagine it could go up to as many as 10 extensions. also, the extension are in the same range as all the other extensions in the definity. Actually, they are working right now as digital stations on the avaya.
one other question, they were inquiring as to whether we could make the number still ring on other existing stations at the same time they go out the pri to the other switch..

Thank you ahead of time for any assistance you may provide.

Sincerely,

Crybrook